Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Feb 21, 2015

Suck it Up.

A clean vacuum is essential in the process of vacuuming with purpose.
 Unfortunately the cost of  replacing  vacuum bags can run as high as $10.00 a piece.

Re Use your Vacuum bag

To re-use your vacuum bag, care must be taken to ensure that the cardboard hole
for connection is not damaged or destroyed in the process of removing the bag from the vacuum.

With a package of Velcro and a half hour time invested
 it is possible to triple the life of a "disposable" vacuum bag.

 HowTo

Re-Use a "Disposable" Vacuum Bag
#1. Cut 1/4 inch off the bottom end of the vacuum bag,
This cuts off the seam and allows
 the bag to open.
This was a used bag.I emptied the contents and turned the bag inside out. I gave it a good shake out and turned the bag right side out.

#2. Trim an additional 1/4 inch
off of 3 sides of the vacuum bag.
The front and both sides.
The back of the bag is left uncut.
It remains approx.1/2 inch longer
than the front and sides of the bag.




Remember Velcro has a front and a back.
I recycled the Velcro on this bag so it happens to be stitched  on in 2 inch strips.


Velcro is attached.
  #3. A piece of Velcro Front  
is stitched to the OUTSIDE of the bag.
Sew along the front edge and down both sides
TO THE CENTER of the folds on either side only.

 #4. Onto the back (remaining) part of the folds
a strip of Velcro Back  is attached.

The velcro front and velcro back create a good seal in the bag folds.


#5. A piece of Velcro back is then stitched to the INSIDE on the (longer) back flap of the bag.

    
Lillian the Domestic Engineer


      #6. Tuck in the side
 meeting velcro front with velcro back at center fold.
                     

                                               






#7. Fold the back flap over the front of the bag.
       Re insert bag into vacuum.

 







Turn it on and Suck it up.

 Oh Kirby!
 I have now worked at the feat of sucking it up for over 40 years!

 Canisters, uprights, built in, bag less, useless, wonder less and hopeless...
 Like it or not Vacuums are a part of us.

I remember the day a door to door salesman arrived on our doorstep lugging his shiny upright vacuum.
It was red hot. It had a light on the front of it. It had a cloth bag with a scraper built in to clean itself and it came with a handful of cool tools. It was 1975.
 I remember him coming in and dumping a line of dirt on the carpet in an effort to impress.
 I remember him claiming that there was nothing out there that could compare to the likes of his

  ... KirbyVacuum

And then he turned it on.
I remember the noise of it. You couldn't hear yourself think.
I remember the power of it. The dirt disappeared.
I remember that the weight of it and the improbability of carrying it.
I remember the cost of acquiring it and the payment options
that came with that.

I remember the proud look of ownership on my Mothers face.
I recall the cleaning schedule that she then made.
Saturday would become my vacuuming day.
I remember her request that we follow up the vacuuming
with the combs of a rake!
Yup,we were to groom the shag carpet for heavens sake!



Recently I ran into old Kirby at my work place. The moment I turned him on he blew dust at my face.
The bag was filthy and the zipper was out of place.
Suck it up suddenly meant something else to me.Mean, mean machine.

Kirby whined and Kirby wurred as the memories of his success became more blurred.
I parked him back in the closet with my fond memories and got out the compact Kenmore
 that was next to it. Sometimes size does matters!

The tools of the trade may be changing but the fact remains
that with a dirty vacuum bag one will work in vain.












Feb 10, 2014

Panel Denim and Tie Skirts




RENEWED BLUES D.I.Y.
Blue Jean Skirt. 
Denim Skirt

 Cut off the legs. 
 Leave enough length in the short to allow for the seam allowance.
 Cut each leg panel in half and then into quarter strips.
 Cut off at the top of leg panel to the desired length. The hem that exists on the leg panels will act as the finished hem on the skirt.
Denim Panels for Jean skirt
     
  I flipped two sections of the denim leg panels and sewed them 
into the skirt wrong sides out.
  I liked the variance of color and the improved effect it created in the overall design.
 The two tones of blue in the panels nicely complimented and then accommodated this spectacular tie.
 I love the iridescence in the tie. As you walk in the skirt the tie shifts from a purple iridescence to a yellow golden iridescent hue.
           The Tie was cut and top stitched onto the denim after the leg panels had been sewed together and before the skirt was stitched to the shorts.

Blue Jean Skirt


                                                        The finished Skirt.
                         After sewing together the denim leg panels and sewing on the three tie sections, I then top-stitched each seam in a yellow denim thread.
                              I was pretty happy with this skirt. 
                                           It is so soft!
 Blue Jean Skirt @Lillian the Domestic Engineer

             This Skirt below was a work 
                                    and then a re-work. 
I had originally sewn only the black rayon skirt onto the shorts. 
I hand stitched a black pig skin suede band around the hips and over the seam before finally deciding that I didn't like it at all.

The second time rework was a third time design for this  
   Renewed Blue Jean Skirt. It is finally a keeper.

MORE Blue Jean Skirt 

I added in the denim panels at the front and back. 
I used the heavy seam strips I had cut from the bottom of the legs and the side seams of the jeans to sew down the between the denim and the rayon panels at front and back of skirt as well as across the hip seam..

    As a rule I try to use the bottom hem of the original garments whenever possible.


See MORE RENEWED BLUE JEAN SKIRTS HERE

SEW, what are you waiting for?

CLICK HERE for more Creativity! The Things I do for Love!

 Fun With Fundraising
Have you Volunteered your TIME lately?
I'm off to Volunteer at a Bingo Hall in support of the local Skating Club today. Although I don't have Children in the Club, I know it takes a Village to raise a Child!
My neighbors asked me if I could step up to help out for the day.
 Seems a lot of the group has gone away and if they don't send 14 people to work the Bingo today
 the Group will lose their Placement and their Profits..
A single Bingo can provide up to of 800.00 for the group.
With more time than money and with a good understanding of the need,
 I will take my place at the Bingo Hall Today.


It is easier to find Men who will Volunteer to die, 
than to find those who are willing to endure pain with patience.
                                             -Julius Ceasar

MINNIE MOUSE COSTUME

 Happy Halloween!
Tis a wonderfully colorful time of the year
Lillian the Domestic Engineer

Minnie Mouse Costume
This year I have risen to the challenge and enjoyed the process of creating Mickey and Minnie Mouse costumes for one of my Sons and his Lady friend.
I was thrilled with the end results and happy to successfully work within the budget.
Less than 15.00 for each costume went into purchasing the materials needed... the blood, sweat and tears in the labor were lovingly provided for free.


After unsuccessfully scouring our local second hands stores for the perfect red fabric , I turned to the Dollar store next door in hopes of purchasing a red fabric table cloth. There instead, I found the perfect red fabric in a  beautiful fleece blanket (which nicely lent itself to the overall animated effect of costume)
At 3.00 a piece and being as good as yardage (in that I am not fiddling around with say a dress to recover the fabric) I purchased two blankets and with great glee headed home to get started!

Minnie's skirt would be cut from one blanket and Mickey's pants from the other.
I cut and stitched Minnie's skirt according to the Simplicity Pattern instructions that I used.
The new belt was purchased 2nd hand .
 The gloves are made as per instructions on Mickey Mouse Costume Post
and the white hearts have all been hand cut from white felt and applied with Speed Sew Adhesive to the finished skirt.
Minnie's Blouse Yolk picks up on the hearts and because they were Adult costumes I also gave Mickey a "Heart On" on his butt!
 Minnie's ears are made as per instructions on Making Mickey Mouse Costume Post.
I attached her ears to a furry headband that I found in the .75 bargain bin that had originally sported a different set of ears. I carefully cut off the other ears before stitching Minnie's directly onto the fuzzy band.
 I hand stitched the three layers of her ears together with a gold metallic thread and attached the mini bow
directly to the headband.
Minnie Mouse Costume
Minnie's darling Bag and Ears!
   




   In the same bin at the Bargain Store 
where I found Mickey Mouses yellow Booty felt,
 I discovered this darling Bag! For a whole 3.00 It was just too good to be true.

   Assemble the yoke pieces



Minnie Mouse Costume. DIY
The pearl pendant, complete with mini black bow was found hiding in my treasure box of broken bits. It really was the perfect fit for finishing the yoke. 






I found the little Mickey Mouse Earrings in the second hand store for a dollar and simply painted the stained surface with a copper Metallic Paint.
Minnie Mouse Costume Blouse Yoke

After holding out in hopes of finding or possibly borrowing a Crinoline Skirt, I finally had to set about
Making a Crinoline Skirt.

Minnie Mouse Costume
Minnie Mouse  Bag and Ears!
                                          DIY. Make Mickey Mouse Costume CLICK HERE
                                       
                                             Visit my page For the Love of Crafting HERE

Jan 13, 2014

A Lightbulb Moment

Put on a Happy Face!


These Hand Painted
 Light Bulb
 ORNAMENTS
 are truly one of a kind!

Each year,
for two years
in a row
our familys annual acquisition of

 Hand Made Christmas Tree Ornaments,

were made from light bulbs and lovingly created by Grandma!




A Bright idea


Christmas Ornaments

Light Bulb Tree Ornament
These
Hand Painted 
Light Bulb
Christmas Tree
Ornaments

are priceless to me.
 Grandma made and impossible to replace!

The faces are painted in Acrylic paint onto a regular light bulb to which a primer coat of white Acrylic paint has first been applied and set to dry.
 Once the face painting is completed it is sprayed lightly with an acrylic sealer which gives the finished bulb the shiny finish as well as giving a little boost to the bulbs overall durability.
I must say however that I don't find the Light Bulb Ornaments to be any more breakable than any other glass tree ornament.




                                  Holy Cow, how lucky we are!

Lillian the Domestic Engineer Blogspot.ca
The hats were purchased at the dollar store and the hair and other embellishments are gathered through out the year. Be creative! Hot glue is used to attach the hair, the hats and the hanging cord or ribbon to the light bulb.

Light Bulb Christmas Ornament

Hand Painted Light bulb

MORE at Things I do for Love PAGE

Oct 31, 2012

BUZZ LIGHTYEAR Costume DIY

   Thank you for the memories.
Lillian the Domestic Engineer
I'm enjoying arriving at a time when my kids have aged through the awkward stage and the opposition era.
A time when nothing I said, did or made was
 or would ever be considered remotely right or even possibly plausible!
Each, slowly arriving at a time when they are willing to acknowledge and even employ their talented Mother
(if I must say so myself) and dare I say,  if I don't toot my own horn who will?
 I jumped this year at the request to create a Buzz Light Year Costume for one of my boys.
For help with this Costume I must first  give credit where credit is do. http://mojoturbocostumes.wikispaces.com/Buzz+Lightyear+Costume

Thank you to Mojoturbocostumes for being patient enough to record detailed step by step instructions
for creating the BUZZ LIGHT YEAR Costume on their page. I referred to the pictures and notes there as I set about to built my own Buzz Light Year step by step. Altering and improvising as I worked along at creating a costume for a 180 pound 6 foot man!
Buzz+Lightyear+Costume

Best Craft Blog
The gloves were purchased at the dollar store and brushed with a coat of mixed Silicone, white acrylic paint and Modge Podge, a white pase like primer for painters.  Left to dry for 24 hours I then painted the green, purple and white acrylic paint on the glove. They are then outlined with a waterproof ink, fine tip Sharpie Pen.

 The Gauntlets are created from wrist protectors that I found in the front closet, initially purchased for working with barb wire fence. I glued a layer of white construction paper to the inside to lengthen them and then coated the entire thing with the same mixture used on the gloves above before painting the final coat of  green and white.




DIY @ Lillian the Domestic Engineer.Blogspot.ca

 The body Armour and the Jet pack were constructed from a thin, blue foam mat that I found in the garage. 

After drawing out the pieces I would need, I cut two of each and glued them to their mate using contact cement. On areas where the layered areas would be seen, I applied a strip of the blue foam that I had cut to exactly the same width as the two layers were wide. It gave a clean finish to the end product.   
As visible in the neck area on the Chest Armour above.
Once all the pieces were assembled I applied several coats of the mixed sealant mixture (as noted above) and left it all to dry over night. The purple, green, red and white paints as well as the Lightyear sign the exhaust area and the logo were painted. 
A cloth strap was glued onto the side of the front panel allowing them to be pulled back together and fastened using the strip of Velcro on each. The finished front and back pieces are finally connected at the shoulders with a cloth hinge that has been glued in place.

 The purple head piece was fashioned from the pattern of a bear costume I altered. 
I stitched the black bands into the elbow to represent the joints.  The black at the waist was stitched onto a quilted piece of material before being stitched into the shirt, creating the tubing effect seen on Buzz's waste.
The pants were cut at the knee and cardboard was glued to the inside of the pants to create the knee joints. The bolts were glued together and painted before being hot glued directly onto the pants. The bottom trim and the belt were made from the blue foam that had bee primed and painted before being attached with hot glue.

 Buzz Light Year Costume. DIY
  
 I come in peace... seeking candy!

DIY Mickey and Minnie Mouse Costume
See more HERE

.




Powered By Blogger